What are the operating procedures for the application of flat glass washing machines?

     A flat glass washer is an indispensable and important piece of equipment in the busy workshops of modern industry. Its main task is to remove stains, dust and other impurities from the glass surface, ensuring that every piece of glass is as clean as new. In order to achieve the best cleaning results and ensure the safe operation of the equipment, the operator must strictly follow a series of detailed operating procedures.

 1. Preparation: Firstly, operators need to double-check that the power cable is intact and ensure that the earthing system is good to prevent any possible electrical leakage. Next, they need to check that the stock of cleaning fluid is sufficient and that the nozzles are not clogged to ensure that the cleaning fluid can be sprayed out smoothly. In addition, the housing of the cleaning machine needs to be checked for any damage or cracks to ensure the structural integrity of the machine. 

2. Pre-start inspection: Before switching on the main power supply, the operator must check that the emergency stop button is working properly, which is a key part of safe operation. At the same time, make sure that there are no obstacles on the conveyor belt and that the sensors respond sensitively and accurately to ensure a smooth start-up of the machine. In addition, it is also necessary to check whether the indicator lights and displays on the control panel are working properly so that problems can be detected in time. 

3. Start the machine: after pressing the start button, the operator needs to observe whether the machine is running smoothly, and pay attention to listen to whether there is abnormal noise. According to the different thickness of the glass, adjust the speed of the washing and drying part to adapt to different cleaning needs. In the start-up process, you also need to pay attention to the temperature change of the machine to avoid overheating leading to failure. 

4. Place the glass: Place the glass to be cleaned carefully on the conveyor belt to avoid damage caused by collision. At the same time, make sure that there is proper spacing between the glasses to prevent them from colliding with each other during the cleaning process. When placing the glass, it is also important to keep your hands away from moving parts to avoid accidental injuries. 

5. Monitor the process: In the entire cleaning process, the operator needs to closely observe the degree of glass cleaning, and adjust the flow and pressure of the cleaning fluid in a timely manner as needed. At the same time, pay attention to the running status of the machine, once found abnormal should immediately stop the machine to check. In the monitoring process, but also need to pay attention to the use of cleaning fluid, timely replenishment to avoid affecting the cleaning effect. 

6. Finish the work: After the cleaning is completed, press the stop button and wait for the machine to stop running completely. Then turn off the main power supply, and clean up the surface of the machine as well as the surrounding cleaning fluid residues, to maintain a clean working environment. At the end of the work, you also need to check the cleaned glass to ensure that its quality meets the requirements. 

7. Maintenance: In order to ensure the long-term stable operation of the machine, it is indispensable to replace the cleaning liquid and clean the nozzles and filters regularly. At the same time, checking the electrical parts and preventing failures caused by the aging of the wiring are also part of the maintenance work. During maintenance, it is also necessary to lubricate the various parts of the machine to reduce wear and prolong service life. 

     By strictly following these operating procedures, not only can ensure the efficient operation of the flat glass washing machine, but also effectively extend the service life of the equipment and ensure the safety of the operator. Such meticulous operating procedures are an indispensable part of modern industrial production, reflecting the high importance attached to product quality and employee safety.