How can I avoid damage when using a glass panel washer?

   In our quest for excellence in glass panel cleaning, we face a number of challenges, including machine operation, maintenance, adjustment and equipment selection. In order to ensure that the glass is protected from damage during the cleaning process, we need to meticulously analyse and make appropriate recommendations from multiple perspectives:

1. Equipment selection and operation Selection of appropriate cleaning equipment: Select the appropriate cleaning machine according to different glass types and degree of dirt, such as ultrasonic cleaning machine can remove stubborn stains in a short time. Setting the right height of disc brush: Setting the height of disc brush correctly is crucial to ensure the cleaning effect and avoid damage. It is generally recommended that the tip of the disc brush bristles be set at 1.5mm below the glass surface and adjusted as the disc brush wears.

Temperature and pressure control: When using the cleaning machine, the water temperature and cleaning pressure should be controlled, too high a temperature or excessive force may cause damage to the glass.

2. Maintenance and care of regular replacement of consumables: such as disc brush and other consumables with the use of wear and tear, regular replacement is to avoid excessive wear and tear due to disc brush caused by the glass surface scratches the key.

Clean the water tank: The water tank and catch pan need to be cleaned regularly to prevent dirt and broken glass residue, which may cause scratches or damage to the glass during the cleaning process.

3. Timely adjustments to check and adjust the equipment components: for example, the pressure of copper joints and copper screws on the spring needs to be adjusted to the appropriate position according to the thickness of the glass, to ensure stable transmission of the glass and to prevent the glass from breaking due to improper position.

4. Equipment upgrading and technical innovation using advanced technology: the use of advanced cleaning technology, such as ultrasonic technology, can be more efficient and safer to remove dirt and reduce the potential damage to the glass.

5.Operator TrainingProfessional Training: Ensure that all operators are professionally trained and familiar with the operating procedures and precautions of the equipment to prevent damage caused by improper operation.

Emergency Measures: Train operators to master measures to deal with unexpected situations, such as how to properly shut down the equipment and how to deal with emergencies such as stuck glass.

   In addition, after understanding the main measures to avoid damage to the glass panel, the following aspects should also be noted to further enhance operational efficiency and safety:

● Check whether the power line and water connection are safe to prevent leakage of electricity or water.

● Maintain environmental hygiene in the cleaning area to avoid secondary pollution during the cleaning process.

● Do a good job of personal protection, such as wearing gloves, wearing protective clothing, etc., to ensure the safety of the operator.

   In summary, to avoid damage to the glass panel in the cleaning process involves the choice of equipment, mode of operation, maintenance, timely adjustment and operator training and other aspects. By taking the above measures, you can effectively reduce the risk of damage when using the glass panel washing machine, to ensure the efficient operation of the equipment and the integrity of the glass.