Junya Machinery's JYX-2500L and JYX-3000L Vertical Glass Washing Machines Shine in Export to Australia

Recently, Foshan Shunde Junya Machinery Co., Ltd. (JUNYA) received great news. Two of its star products, the JYX-2500L and JYX-3000L vertical glass washing machines, were successfully shipped to Australia. The smooth delivery of this order not only demonstrates Junya Machinery's strong strength in the field of glass washing equipment manufacturing but also marks a further expansion of its influence in the international market.

 

Since its establishment in 2006, Junya Machinery has been consistently dedicated to the research, development, and manufacturing of glass washing and drying equipment. Thanks to the unremitting efforts of all employees and the strong support of customers, it has now developed into one of the representative brands in the glass industry. The company has an average annual output of 1,000 sets, and its products are sold to more than 100 countries worldwide, enjoying a good reputation in both domestic and international markets.

 

The JYX-2500L and JYX-3000L vertical glass washing machines exported to Australia this time belong to the same series as the JYX-1600L and adopt world - leading technology from Italy. The washing section and metal plates in contact with water are made of stainless steel, ensuring excellent corrosion resistance and stability of the equipment. Taking the JYX-1600L as an example, the washing section is made of welded thickened stainless - steel material, which has high strength and is not prone to deformation. The top of the equipment is an 8mm steel plate plus a stainless - steel panel, the bottom is a 5mm stainless - steel panel, the side and middle partition panels are 2mm stainless - steel panels, and the metal plates of other parts are treated with high - grade machine paint or powder coating. While continuing these excellent characteristics, the JYX-2500L and JYX-3000L have optimized and upgraded their structures according to the changes in size to meet the production requirements of different customers.

 

In terms of cleaning performance, both of these washing machines are equipped with three pairs of brushes, including six Ø150mm high - temperature resistant brushes, and are paired with four - time spraying. The cleaning speed is fast and the effect is remarkable. The first three soft brushes can be specifically used to clean Low - E glass. At the same time, the equipment is also equipped with a stainless - steel spring, which can automatically adjust the glass thickness. The applicable range is 3 - 12mm, and for glass with a thickness of 13 - 19mm, cleaning can also be achieved by adjusting the air knife screws.

 

The drying system is a major highlight of these two devices. They use independent circulating air to dry the glass and are equipped with an air heating system, which is energy - saving and low - noise. Even in winter, without an air heater, the temperature can reach 40°C, ensuring that the glass dries quickly and avoiding water stains.

 

In terms of technical parameters, although the JYX-2500L and JYX-3000L have differences from the JYX-1600L in terms of working speed, glass thickness range, maximum width, minimum size, machine size, weight, total power, etc., they all maintain a high - performance level. For example, the working speed of both is 0 - 7m/min, which can be adjusted by frequency conversion; the power supply is 380V, 50HZ, 3 - phase.

 

In terms of main configurations, the JYX-2500L and JYX-3000L, like the JYX-1600L, select components from well - known brands. The main drive motor and brush motor use the YONGKUN brand, the high - pressure blower is the TAIWEI brand, the water pump is from HUNAN, the brushes are ANHUI products, the inverter is the FRECON brand, the components in contact with water and the air knife are all made of stainless steel, the transmission rollers are from Guangdong, and the main electrical components in the control cabinet use the CHINT brand, ensuring the stability and reliability of the equipment.

 

Before shipment, Junya Machinery strictly tested and accepted the equipment in accordance with the GB/T1.1 - 2009 standard. Check the glass from the vertical direction of the glass with the help of a black background and lights to ensure that there are no water marks, no roller marks, no scratches, the glass is dry, and there is no collision or deviation during the transmission process.

 

After inspecting numerous glass washing equipment suppliers, the Australian customer finally chose the JYX-2500L and JYX-3000L vertical glass washing machines of Junya Machinery. These two devices will be applied in local glass processing enterprises in Australia to help them improve production efficiency and product quality. This cooperation not only lays a solid foundation for Junya Machinery to explore the Australian market but also creates broad space for future cooperation between the two sides in more fields.

 

Junya Machinery stated that in the future, it will continue to increase investment in research and development, constantly innovate and optimize products to meet the increasingly diverse needs of global customers and demonstrate the strong strength of Chinese glass washing equipment manufacturing in the international market.